10" x 16"
SmallMouse only, for compact setups where the keyboard already fills the desk. One pass on any press, and the cheapest size to test a new design on.
Blank Sublimation Desk Mats New
Four sizes, up to 18x36 inch
$19.99
Printed in the USA
Polyester micro-weave on a 3 mm rubber base, seamless edge. Four sizes, sold in packs so you can dial in your press before you commit.
- Ships in 1-2 business days
- Free US shipping on orders over $35
- Already at wholesale pricing
Shipped From USA
Quality Guarantee
Fast Shipping
Why you'll love it
What makes our blank desk mats & mouse pads better
We use them
Tested across thousands of prints and customers. Proven quality, not a listing we drop-ship.
Vivid sublimation print
400 degrees at 100 seconds produces an ink infusion that lasts, not a coating that sits on top.
Shipped From USA
We ship every blank from our Phoenix, AZ shop within 1-2 business days. Get them fast.
Quality guarantee
We guarantee against damages or marked up blanks.
Sizing
What size should I get?
Two things decide it: what your customers are asking for, and what fits on your press in one pass. Anything larger than your platen is pressed in overlapping passes, which is doable but slower.
12" x 18"
LargeA gaming mouse mat more than a desk mat. Room to swing at low DPI, but not enough for a keyboard beside it. One pass on a 16x20 with room to spare.
14" x 24"
Most popularKeyboard and mouse together, as long as the board is a 60% or TKL. Right for a laptop desk or a dorm room. This is the one that sells. Needs a 16x24 bed.
18" x 36"
XXLFull desk coverage: keyboard, mouse, coffee and a notepad at once. The best margin per unit of any size. Two overlapping passes on a 16x20 press bed.
Specifications
The details
| Sizes | 10x16, 12x18, 14x24, 18x36 in |
|---|---|
| Top | Smooth micro-weave cloth |
| Base | Non-slip natural rubber |
| Thickness | 3 mm |
| Edges | Seamless or stitched black |
| Sublimation, edge to edge | |
| Care | Machine wash cold, lay flat |
| Ships in | 1-3 business days |
| Made in | Phoenix, AZ or St. Louis, MO |
FAQs
Questions? Answers.
Straight answers from the people who print your order. If yours isn't here, the Help Center covers shipping, files and returns in detail.
400°F for 100 seconds at light to medium pressure. Peel hot and lay flat to cool. Adjust in 5-second steps for your press.
Too much time or too much pressure. The rubber base holds heat, so drop 5 seconds and lighten the press before you change anything else.
Yes. Press in overlapping passes and keep the seam outside the printed area, with butcher paper masking the part you have already done.
That is the edge of the platen pressing in. Too much pressure, or part of the mat hanging off the platen. Lighten the press and re-center it.
A polyester micro-weave top bonded to a 3 mm natural rubber base, cut with a seamless edge so the print runs right off the side.
Unopened packs within 30 days, yes. Once a blank has been pressed it cannot come back, but send us a photo and we will help you work out what went wrong with the settings.
Yes. Ask on the Wholesale page and we will quote pallet and case quantities directly.