Blank Desk Mats & Mouse Pads
Polyester micro-weave on natural rubber, seamless edges.
Blank sublimation desk mats in 12×18, 14×24 and 18×36, and blank 8×9 mouse pads. Polyester micro-weave top on a 3 mm natural rubber base with seamless edges, sold in small packs.
- Printed in the USA
- Quality guarantee
- Ships in 1-3 days
Blank sublimation desk mats and mouse pads
A polyester micro-weave top bonded to a 3 mm natural rubber base, cut with a seamless edge rather than a stitched one, which is what keeps a printed design running right off the side. These are the blanks behind our own desk mats, in every size we sell: 10x16, 12x18, 14x24 and 18x36, plus the 8x9 mouse pad.
Settings we start at
400°F, 60 seconds, light to medium pressure, fabric side up with butcher paper between the transfer and the platen. Rubber holds heat, so peel hot and lay flat to cool; pressing too long scorches the base and curls the corners. A large mat on a small press is done in overlapping passes with the seam falling outside the print.
Why choose us
Why pick W&H for blank desk mats & mouse pads
Seamless edge
The print runs to the edge instead of stopping at a stitched border.
Shop proven
The same blank we press hundreds of orders a week on. No mystery coatings, no surprise batches.
Settings included
Temperature, time and pressure starting points on every product page, not a guess off a forum.
High precision mousing
A tight micro-weave that tracks cleanly at any DPI, so a fast flick lands where you aimed it. Gamers notice the difference, and so does anyone who works in a mouse all day.
Multiple sizes
10x16, 12x18, 14x24 and 18x36 mats, plus the 8x9 mouse pad.
Easy to clean
Machine washable, or a microfiber cloth with a little mild detergent. Lay flat to dry.
Non-slip base
3 mm natural rubber, the same base we ship to customers.
Real answers
Email us a photo of a bad press and we will tell you what went wrong.
Ships in 1-2 days
Blanks ship from our Phoenix, AZ shop. Free US shipping over $35.
FAQs
Blank Desk Mats & Mouse Pads questions, answered
Straight answers from the people who print your order. If yours isn't here, the Help Center covers shipping, files and returns in detail.
400°F for 60 seconds at light to medium pressure. Peel hot and lay flat to cool.
Press in overlapping passes and keep the seam outside the printed area. Mask the pressed part with butcher paper.
Too much time or pressure. Drop five seconds and lighten the press.
Yes, the same blank. The only difference is who prints it.
Ordering for a team or business?
See wholesale pricing