For cars and trucks, fits any standard 6x12 plate
A personalized license plate frame for your car or truck, printed edge to edge on thin 0.025" aluminum. Put your own text, logo or artwork on it, mount it with the screws already holding your plate, and leave it out in the weather.
Real aluminum at 0.025", not thick plastic. It sits flat against the plate as a sleek, decorative piece, and fits any standard bracket.
The whole frame prints, not just the top and bottom rails. Your artwork, color or pattern runs across every surface with no blank borders or white edges.
Sublimation puts the ink into the coating, then a UV layer goes over that. It takes car washes, road grit and Arizona summers without peeling or fading.
Made to order in our own shop and shipped in 1 to 3 days. Order it with a plate and the two arrive together, printed to match.
| Fits | Standard 6 x 12 in US plates |
|---|---|
| Outer size | 6.5 x 12.25 in (165 x 311 mm) |
| Material | Aluminum metal |
| Thickness | Thin 0.025 in aluminum metal, perfect for a snug fit, decorative fit only |
| Print area | The full frame, it prints everywhere |
| Dye sublimation, UV coated | |
| Mounting | 4 holes, standard bracket spacing |
| Ships in | 1-3 business days |
| Made in | Phoenix, AZ or St. Louis, MO |
Upload your photo or logo, add text, and preview it live. Or upload your file and let our team place it for you.
Your design goes straight into production as you built it. No proof delays unless you ask for one.
Printed, pressed and shipped from Phoenix, AZ or St. Louis, MO in 1-3 business days with tracking.
Straight answers from the people who print your order. If yours isn't here, the Help Center covers shipping, files and returns in detail.
No, this is a thin, modern license plate frame, made from high quality 0.025" aluminum. It sits flat against the plate instead of adding the bulk and shadow line you get from the chunky frames on most cars. Decorative fit only, not a heavy duty guard.
If your plate is the standard US 6x12 inch size, yes. The four holes match the spacing on every factory bracket and aftermarket holder we have come across, so it goes on with the screws already holding your plate.
The frame sits around the outside edge of the plate, so the sticker corners stay visible on a standard plate. Every state places them slightly differently though, so hold the frame against your plate before you mount it if yours sit unusually far in.
Yes, and it is the most popular way to order. Design the plate, add the frame, and use the same artwork or color on both. They print together and ship in the same box.
Anything you can upload: a shop name and phone number, a school or team, a logo, a pattern, a color to match the car, or a joke. The whole frame prints, so a design can run right around it rather than sitting in two strips.
A frame is legal as long as it does not obscure the plate number, the state name or the registration stickers, which this one does not on a standard plate. Rules vary by state, so check yours if you are unsure.
Soap and water, or whatever you wash the car with. The print is under the coating rather than on it, so a sponge cannot lift it. Skip anything abrasive.
Your label prints inside the collar, in place of ours.
Saving your design…
Join the W&H list and we'll send your welcome code right now. New products, bulk deals and the occasional freebie. No spam.
First order only. Unsubscribe anytime.
